Wisconsin Legislature: NR 273.004(1)(b)

NR 273.003(23) (23) “Heat treatment” means the application of heat of a specified temperature and duration to change the physical properties of the metal.

NR 273.003(24) (24) “Hot pressing” means the forming of a powder metallurgy compact at a temperature high enough to effect concurrent sintering.

NR 273.003(25) (25) “Hydrotesting” means the testing of piping or tubing by filling with water and pressurizing to test for integrity.

NR 273.003(26) (26) “Impregnation” means the process of filling the pores of a formed powder part, usually with a liquid such as a lubricant, or mixing particles of a nonmetallic substance in a matrix of metal powder.

NR 273.003(27) (27) “Metal powder production” means mechanical process operations which convert metal to a finely divided form.

NR 273.003(28) (28) “Milling” means the mechanical treatment of a nonferrous metal to produce a powder or to coat one component of a powder mixture with another.

NR 273.003(29) (29) “Neat oil” means a pure oil, with no or few impurities added, used mostly as a lubricant.

NR 273.003(30) (30) “New source” means any point source for which construction commenced after March 4, 1984, and from which pollutants may be discharged either directly into waters of the state or into a POTW.

NR 273.003(31) (31) “Nonferrous metal” means any pure metal other than iron and any metal alloy for which a metal other than iron is the alloy's major constituent in percent by weight.

NR 273.003(32) (32) “Off-kg” and “off-lb” mean the mass of metal or metal alloy removed from a forming operation at the end of a process cycle for transfer to a different machine or process.

NR 273.003(33) (33) “Powder forming” means forming and compressing powder into a fully dense finished shape, usually within closed dies.

NR 273.003(34) (34) “Precious metals” means gold, platinum, palladium, and silver and any alloy containing 30% or more by weight of these metals.

NR 273.003(35) (35) “Product testing” means operations such as dye penetrant testing, hydrotesting, and ultrasonic testing.

NR 273.003(36) (36) “Refractory metals” means the metals columbium, tantalum, molybdenum, rhenium, tungsten, and vanadium and their alloys.

NR 273.003(37) (37) “Rolling” means the reduction in thickness or diameter of a workpiece by passing it between lubricated steel rollers.

NR 273.003(38) (38) “Roll bonding” means the process by which a permanent bond is created between 2 metals by rolling under high pressure in a bonding mill.

NR 273.003(39) (39) “Sawing” means cutting a workpiece with a band, blade, or circular disc having teeth.

NR 273.003(40) (40) “Shot casting” means the production of shot by pouring molten metal in finely divided streams to form spherical particles.

NR 273.003(41) (41) “Stationary casting” means the pouring of molten metal into molds and allowing the metal to cool.

NR 273.003(42) (42) “Surface treatment” means a chemical or electrochemical treatment applied to the surface of a metal, such as pickling, etching, conversion coating, phosphating, and chromating, and any rinse or multiple stage rinsing which follows.

NR 273.003(43) (43) “Swaging” means a process in which a solid point is formed at the end of a tube, rod, or bar by the repeated blows of one or more pairs of opposing dies.

NR 273.003(44) (44) “Tube reducing” means an operation which reduces the diameter and wall thickness of tubing with a mandrel and a pair of rolls with tapered grooves.

NR 273.003(45) (45) “Tumbling” means an operation in which castings, forgings, or parts pressed from metal powder are rotated in a barrel with ceramic or metal slugs or abrasives to remove scale, fins, or burrs, either dry or with an aqueous solution.

NR 273.003(46) (46) “Ultrasonic testing” means a nondestructive test in which sound at a frequency above 20 Hz is applied to metal which has been immersed in a liquid, usually water, to locate inhomogeneities or structural discontinuities.

NR 273.003(47) (47) “Wet air pollution control scrubbers” means air pollution control devices used to remove particulates and fumes from the air by entraining the pollutants in water spray.

NR 273.003 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.004 NR 273.004 Compliance dates.

NR 273.004(1) (1) Any existing source subject to this chapter which discharges to waters of the state shall achieve:

NR 273.004(1)(a) (a) The effluent limitations representing BPT by July 1, 1977; and

NR 273.004(1)(b) (b) The effluent limitations representing BAT by July 1, 1984.

NR 273.004(2) (2) Any new source subject to this chapter which discharges to waters of the state shall achieve NSPS at the commencement of discharge.

NR 273.004(3) (3) Any existing source subject to this chapter which discharges to a POTW shall achieve PSES by August 23, 1988.

NR 273.004(4) (4) Any new source subject to this chapter which discharges to a POTW shall achieve PSNS at the commencement of discharge.

NR 273.004 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

subch. I of ch. NR 273 Subchapter I — Lead-Tin-Bismuth

NR 273.01 NR 273.01 Applicability; description of the lead-tin-bismuth subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from lead-tin-bismuth forming.

NR 273.01 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.011 NR 273.011 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources:

NR 273.011(1) (1) Drawing spent neat oils; and

NR 273.011(2) (2) Degreasing spent solvents.

NR 273.011 History History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.012 NR 273.012 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT: - See PDF for table